Manufacturers and Suppliers of Electro-Optic Components

250 Series High Voltage Video Amplifier

High voltage video amplifier for driving electro-optic modulators

This is a linear Class A output video amplifier with a maximum differential output of 275V over the range d.c. to 7MHz. The two outputs can also be set to 250V dc relative to each other using a bias control. This facility allows an electro-optic amplitude modulator to be set to any desired light output intensity level for any input signal level. This output bias does not introduce any limit to the signal output range.

The amplifier has been designed to drive electro-optic modulators from the EM200 range where the load is purely capacitive and does not exceed 100pf. The output is short circuit proof.

Specifications

Signal output voltage range 275Vdc - 6MHz bandwidth
Amplifier Square Wave Rise & Fall Time
using 100pf load
< 65 ns (10% - 90%)
Bias Voltage Range +250V to -250V
Input Voltage for Full Output 1Vdc or 2Vpp., ac
Input Impedance 50 W nominal
Cabinet Size (mm) Height 220, Width 530, Length 340
Mains Voltage 110/200/240ac 50-60Hz
Temperature Range 0 - 40C ambient




Go to top of page